Инструкция на русском языке касио 2747

инструкция на русском языке касио 2747
Clean the bit after every use of it. The contents are subject to change without notice. LC-60LE631M/X-WH CHAPTER 1. OUTLINE AND DIFFERENCES FROM BASE MODEL [1] OUTLINE / DIFFERENCES FROM BASE MODEL This model is based on the LC-60LE630M/X and partially modified. The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc. Indicates lead-free solder of tin, silver and copper. Usually ships within 6 to 10 business days upon payment successful.Authenticity:100% Authentic and Brand New Armani Exchange WatchWarranty:1 Year Seller’s Warranty.


The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition. When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper. • Be careful when replacing parts with polarity indication on the PWB silk. For continued protection, replacement parts must be identical to those used in the original circuit. The performance specification figures indicated are nominal values of production units.

Make sure to turn on and off the power of the bit as required. If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Производитель: Швейцария Механизм: кварцевый Материал: гипоаллергенная часовая сталь марки 316L Стекло: сапфировое нецарапающееся с антибликовым покрытием Особенности: водоустойчивые — 3 АТМ (влага и брызги) Вес: 109 г. Цена: 4580 руб. 2290 руб. The alphabetical character following LF shows the type of lead-free solder. Insert and tighten four short screws into the holes of the stand cover. CAUTION Attach the stand in the correct direction. Be sure to follow the instructions.

Похожие записи: