Make sure that you have a battery backup in the scanner if you are not using an electrical outlet or you will eventually lose the frequencies in your scanner’s memory. Press «E/Yes» This will save the conventional frequency to the «Qck Save Cnv System -> Qck Save Grp» If you desire to place the Cnv Freq. in a already existing conventional system press «.No» key, then select the Conventional system from the menu. Rechargeable Batteries so You’re Ready to Go Simple USB charging allows you to recharge your scanner’s batteries from a computer, or adapters for many wireless telephones. You should see the display blink two times if you have stored the frequency correctly. Uniden Scanners that support Close Call include: Close Call Do Not Disturb When set in this mode, the scanner will periodically make Close Call checks whenever the scanner is not receiving audio in another mode. Most scanners can be programmed in these five easy steps: Press Manual 1 Manual (should be channel 1) Enter a frequency Press E Press Manual to advance to the next channel Repeat steps 2 to 4 Conventional Programming XT/T Series of Scanners Press «Hold/Resume» Key While Scanning a Cnv System.
Specific questions on these scanners can be directed to the Uniden forum at Radioreference; be sure to look at the articles first. The BC92XLT comes with: AD008 AC adapter (6 VDC +), belt clip, flexible BNC antenna, wrist strap, and English/Spanish Owner’s Manual. The backlit LCD display makes for easy night time operation with Uniden’s Patented Backlight-On-Squelch feature that illuminates only when there is channel activity.
Items you will need References Article Feedback Click here to provide feedback on this article. By Pamela Gardapee Learning how to program a handheld scanner will allow you to enter frequencies of interest to you in your area. Ten Scan Banks Designed for simple operation, tap any of the number keys while scanning to instantly turn on or off any of the 10 banks.