Green dvr-04 инструкция

Step 2) If the same, power off , unplug HDD. Step 3) Boot up DVR. Step 4) Menu, do a factory reset. Arrow keys act as navigation keys in device guides and menu systems. Illuminated POWER key serves as an indicator light to provide feedback. Step 2) Test power supply with Volt meter.

Step 4) If still no power, then go to website for the RMA Request Form. My unit is displaying lines on my screen. Step 3) Check if the DVR power switch is on. (some models) Step 4) Also check the hard drive. Was this article helpful? 0 out of 0 found this helpful Have more questions? Step 6) Disconnect the power cable from the DVR. Step 7) Disconnect the power & data cable from the hard drive. Step 5) Disconnect the power cable from the DVR. Step 6 ) Disconnect the power & data cable from the hard drive.
Step 2) Disconnect the power cable from the DVR. Step 3) Disconnect the power & data cable from the hard drive. Step 8) Connect the power cable to the DVR. Step 9) Power on the DVR. Step 10) If still beeping, then go to the website for the RMA Request Form The DVR doesn’t detect the HDD anymore. Step 1) Connect another power supply to the unit. Each press of the Contour button tells the remote to change receivers.Result: The receiver and remote are paired.Unpair the remote.When not paired, the remote uses IR signal only and line-of-sight is needed to control a receiver. Step 4) Check if the DVR power switch is on. (some models) Step 5) Also check the hard drive. Step 1) Power off the DVR, remove cover and check all HDD connections.

Похожие записи: